Description
When ambient temperature rises beyond the preset increase rate, the heat sensitive element held to the detector reacts to heat in a way of inflating air therein, causing the diaphragm to be pushed upwards and the electrical contact to activate to make signal lamp to light up and send fire signal to the receiver.
Prevention of non-fire alarm generation: Erroneous non-fire alarming is minimized by make air to be leaked to the leak hole in the case of low rate of rise in temperature.
Manufacturer | CN-EGS |
Operational voltage: | 24V DC ¡¾20% |
Class 2 Type | common-type, restorable type, non-waterproof type |
Color | White |
Number of links per circuit | 50 or less |
Attachment height for detection area | less than 4m - 70§³ / 4m or higher to less than 8m - 35§³ (in case of fire-resistant construction) |
Ambient environmental conditions | temperature: -10¡É~50¡É / relative humidity: 10%~90% (non=condensation) |
Size | 110mm(¥Õ) * 38(H)mm |
Weight | 129g |
Lamp in alarm state | flashing red LED |
Type No | Gam-10-28 (Approved/certified as fire safety product) |
Model | CND-100R |